The Denture Injection Unit is composed of a hot press (frame, cylinder, heater, bracket and flask etc), (temperature control, timer and electric system). This injection system is composed of a heater and a hot press. The function of the heater is that it heats the cartridge at the temperature of the. 282°-288°for about 7m30s-11m, making the flexible denture material melt in the. The function of the hot press is that it injects the molten material into flask.Which is prepared in advance. The heater will make a beep sound when it finishes heating. Principle of the CMS50D Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology, the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger. The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc.
Integrated with SpO2 probe and processing display module Small in volumelight in weight and convenient in carrying Operation of the product is simple , low power consumption SpO2 value display Pulse rate value display, bar graph display Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage Automatically power off function: when the device is under the state of measuring interface. It will automatically power off within 5 seconds if the finger falls out of probe. Various color of cover can be selected.
Display ModeOLED display SpO2 Measuring Range0%100%, (the resolution is 1%). PR Measuring Range30bpm250bpm, (the resolution is 1bpm) Accuracy±2bpm or ±2% (select larger) Measurement Performance in Weak Filling Condition:SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2% (select larger). Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.
Power Consumptionless than 25mA Voltage: DC 2.6V3.6V Power Supply:1.5V (AAA size) alkaline batteries × 2 Battery working hour: Theoretical number is 20hours. Safety Type:Interior BatteryBF Type.Sell in standard a hanging rope a user manual. Dimension:57(L) × 31(W) × 32(H) mm Weight:About 50g (without the batteries). FDA declaration: The sale of this item may be subject to regulation by the U. Food and Drug Administration and state and local regulatory agencies. All of our products are CE approved. Please kindly check the copy of the certificate in the listing below. The item "400W Dental Flexible Denture Injection Partial System Machine Heater + Gift Free" is in sale since Thursday, August 3, 2017. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Other Healthcare, Lab & Dental". The seller is "easydeal999" and is located in Chino, California.
This item can be shipped to United States.