The machine has become the main equipment of abrasive material. Three rollers of the machine with chilled alloy casting, thickness of chilled alloy layer is 15 - 25 mm, surface hardness is HS68 75. After grinding for once or several times, finally achieve the required fineness (about 3 to 18 microns in general, to fineness determination).
Three-roll mill consists of seat, the guide cover, the roll shaft housing, feeding copper knife, the riving knife plate, the cooling means and gears, pulleys, etc. Machine construction (1) Transmission systems (2) Moving parts (3) The roller (4) Loading parts Maintly consists of two copper knife and copper knife holder. Prevent grind maerial to both ends overflow. (5) Cooling parts (6) Adjustment parts (7) Discharging device By adjusting the pressure screw on the blade, the incision should be slightly higher than the center of the roll, this makes it easy scraped the materials attached to the roller surface.
2.1 Before work: Keep the roller surface clean, lubrication part has enough lube 2.2 At work: (1) After start the machine, adjust fast, slow roll to a certain position (soap and lead , the distance of fast, slow roll is 0.5 mm or so). According to your need to make a precise regulation after add materials.
Generally , the colorific deepness is consistent after the roller adjust well. If the middle colour is light but two ends colour are thick , you can adjust the speed of the cooling water. (2) Avoid grinding with corrosive materials. (3)Charging copper knife can't press too hard.Add lubricant in the contact arc frequently. (4) Pay attention to the bearing, it's temperature should not be higher than 45. 2.3 After work Loosen the roller, copper knife blade and discharge, then clean it. Maintenance and repair (1) Please inject lubricating oil on the roller left every 35 days.
(2) We have inject enough lubricating oil to the bearing house. Please inject lubricating oil half years later. (3) If long term storage , please coated the rollers and other moving parts with preservative grease. (4) Please stop use the machine if the rollers out of shape(both ends are low, and the middle is high), then repolished and adjust. Orders are processed from Monday-Friday;Not on the weekends & public holidays.We will work with you to get the case resolved in the fastest method. Please contact with us at first for more details. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on.
If an item is received damaged, customer service must be contacted within 7 days of receiving your item. Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. The item "3-Roll Grinding Mill Machine Grinder Lab Applications crushing Liquid pigment" is in sale since Monday, April 29, 2019.
This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Other Healthcare, Lab & Dental". The seller is "tom_combine22" and is located in Hayward, California. This item can be shipped to United States.