500W Dental Lab Wet Model Shaping Trimmer Trimming Machine JT-19 with 10 Disc FDA

  

500W Dental Wet Model Trimmer Equipment Disc Gypsum Arch Machine 2800rpm UK. Constant size and performance without fatigue. Effective: Slice easily through 2800 rpm. Stable: More than 20kg Mounted on non-slip feet. Grinding Water Or Dry: The trimmer can be transformed working water dry work, but work in water is recommended.

Silent: Disc bore prevents noise and vibration. Ergonomics:Outer shapes are round, easy to clean. Wide gradient and sloping work table. Cleaning size can work in 3 different angles, you can adjust the screws. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve. Connect the waste-disposal tube to the unit. Connect the power cord, and switch on the power switch (O=off, l=on). When braking, it is normal to hear clicking before the sand tablet stops.

If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18). To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet). If there is some abnormal noise when working on.

Disc is not plain enough. The machine does not work when power on. Power: 500W Rotational Speed: 2800 rpm.

Dimensions: 44×35×35cm Weight of the dental trimmer: 20kg. Disc Diameter: fits 23.5-32cm / 9inch - 12.5inch. 1x JT-19 Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment. The sale of this item may be subject to regulation by the U.

Food and Drug Administration and. State and local regulatory agencies. If the item is subject to FDA regulation. If you have questions about legal obligations regarding sales of medical devices.

You should consult with the FDA's Center for Devices and Radiological Health. Thank you for your cooperation.