Setting the time (Skip to next step if unneeded) then press "+" and" -" to set the time needed (time range is 0.1-1.8seconds); The equipment is now in standby mode. Put the Tooth film plumb behind the tooth which is going to be taken picture and be as close as possible (the smooth side stick to the tooth) Keep the ball head plumb to the tooth projection position; Have the ball headtooth and tooth film steadily mutually plumb. After positioninguse the ON/OFF on the main Unit to take pictures. (Notice: gently press 0.5 sec to turn it on).
Points for Attention Make sure the angle of filmtoothand ball head are properly aligned when taking a picture. Keep them steady until the last step of picturing; making sure that there is no change in any of their positions. Remember to turn the power 0ff when work is done. Charge the battery if the machine cannot work and the red lamp lignt After turning the power onwait one minute before taking picturesthis allows the ray to provide a steady output. The equipment switches into protection mode automatically when the voltage is incorrect. If this occurs it will not be able to carry out the normal work of filming. When taking picturesthe ON/OFF button could stop the objection and then the machine goes back to the preparation mode. Use high quality tooth film and developing liquid to make clear pictures. Handle the ball head gently while in useso as not to damage the delicate component. Keep the tooth film and the liquid in a proper place and use them within the shelf-life period. Development of films should be performed at temperatures ranging between 23-25 degrees Celsius to ensure the image quality. Other requests accordance with the scope of the technical parameters. Please read the manual carefully before using. The tube voltage frequency of this machine is 30 KHz, and the tube current is 0.2 MA.The radiation scope is at an angle of 24 degrees, located within a distance of 1.2 meters ahead. Toshiba 0.3mm x 0.3mm micro-focus tube 3.
No protective operation room is needed when installing the complete machine 4. Flexible adjustment of position and angle of handpiece 5.Compact in volume, light in weight, convenient for carrying 6. Time is adjustable, high contrast of picture, imaging in focus 7. There are vacuum components and high-pressure parts inside of the machine, so for your safety and the maintenance of the machine 8.
The tube head is equipped with excellent radiation-shield protection except the radial mouth, and tests have shown that the radial index is zero. Non-film inspection and storage can be realized when corresponding to a sensor. 20cm Tube voltage: 60KV Relative Humidity(RH). This portable dental X-ray unit is high frequency machine.
The body is small, light weight and nearly no radiation. It has excellent image quality, portable storage, save more space. It uses high frequency and DC international power supply.All of the components installed in the central PC board concentrated. Shock, set-up, electron tubes, all of them are insulation vacuum, sealed stereotype protection.
There are also manual buttons installed on the surface of shell, as well as batteries and charges7. This unit mainly suitable for oral pre-treatment for learning internal organizational structure, root depth and so on, is indispensable in daily life clinic equipment, especially for dental implant surgery.It also can connect with sensor, is great convenience. The battery is durable, it can take about 5 hundred images after fully charged. It can be connected with intra-oral digital X-ray imaging system. Warning: After turning on the machine, wait for 1 minute, the voltage can be stabilized before normal useAfter each photo taking, you need to wait for the normal value to return before taking a normal photo.
Technical Parameter: Tube voltage: 60KV Tube current: 1mA Exposure time: 0.1--2.0s Frequency: 30KHz Rate power: 60VA Distance from skin to cone: 130mm Tube focus: 0.3mm0.3mm Battery: DC14.8V 6400mAh Charger input voltage: AC100V-240V±10% Output voltage: DC16.8V Ambient temperature: 540 Relative temperature. The sale of this item may be subject to regulation by the U. Food and Drug Administration and state and local regulatory agencies. If the item you received is damaged or defective, Please leave message us immidately. Our guarantee does not cover accidental damage or wear of product caused by customer.
Thank you very much for your understanding! You feedback is VERY important to us. We understand the concerns and frustrations you might have, and will try our best to resolve the isuues. Serivce is our #1 priority at BAISTRA!
If you leave message immediately after placing the order, we will make every effort to assist you with your change request. We offer the best items at the best prices.
We strive to exceed all your expectations and put a smile on your face. We stand behind our products and pride ourselves on OUTSTANDING customer service. The item "Dental Portable Digital X-Ray Film Imaging System Machine Mobile Unit Equipment" is in sale since Saturday, December 12, 2020. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\X-Ray Machines & Equipment\Digital X-Ray Sensors". The seller is "dentalbest" and is located in Fullerton, California.This item can be shipped to United States.